MB-2 Dual Function Indoor Dog Fence

DogWatch Indoor Pet Fences emit a radio signal that is detected by the receiver collar worn by your pet—the same way the outdoor hidden fence systems work. As your pet approaches the signal field (initially marked with a series of flags to help your pet identify the area), the receiver collar begins to emit an audible (or vibration) warning beep. If your pet goes beyond the warning zone, the warning is quickly followed by a ‘correction’— a mild electrical stimulation from the receiver collar. With proper training, your pet will quickly learn to stay away from areas that he associates with the warning.

The status light on the transmitter lets you know if the transmitter is turned on.

When using a boundary wire with the MB-2, the status light glows green only when there is a continuous signal loop. See Owner’s Guide for additional information.

Note: The green light may be steady green or blinking green. This depends on the frequency setting of the transmitter.

On the back of the transmitter, there is a signal range knob.

1. Turn the knob toward the ‘Max’ to increase the signal range. This increases the size of the signal field.
2. Turn the knob toward the ‘Min’ to decrease the signal range. This decreases the size of the signal field.

You do not need separate collars. Use the same collar inside and outside.

The MB-2 can be used with up to 500 ft of wire to protect a large area or create multiple “off limits” zones. When used wirelessly, the MB-2 can be adjusted up to a maximum of 13 feet in diameter (6.5 feet in all directions from the transmitter).

No, the MB-2 is designed for indoor use only. If you are looking for a portable pet fence that can be used outdoors, check out our MB-1 Indoor/Outdoor Wireless Dog Fence. Or if you are looking for a pet fence to give your dog or cat freedom in your yard, check out our wired underground Outdoor Hidden Fences.

Important: Do not set the transmitter on or near large metal objects.